Pointed cylinder candle mould – 44 x 65 mm

The 44 x 65 mm pointed cylinder polycarbonate candle mould is the ideal partner for making moulded candles with clean, even lines. Thanks to its rigid, transparent structure, it produces a perfectly smooth cylinder with a polished finish worthy of professional production.

Polycarbonate is a strong, durable material suited to repeated use. It makes visual checks easy during pouring and allows clean demoulding when the making steps are followed correctly.

We do not recommend using beeswax in polycarbonate moulds.

The advantages of polycarbonate for making moulded candles

Unlike flexible moulds, polycarbonate ensures excellent stability and holds its shape perfectly. It gives you:

• A smooth, glossy final surface
• An excellently even cylinder
• Greater durability for repeated production
• Simple cleaning with hot water

For the best demoulding results, it is essential to respect the wax temperature and cooling times.

How to mould your cylindrical candles

Preparing and melting the wax

Place your wax in a suitable container and heat it to 80 to 90 °C, checking with a thermometer. A controlled temperature is essential for an even surface and easier demoulding.

Warning : never melt wax directly in a saucepan or over a naked flame.

Adding colourant

To personalise your cylindrical candles, add colourant chips or liquid colourant, about 2 to 4 g per 1 kg of wax. Test the colour by pouring a small amount of wax into cold water. Too much colourant can impair burn quality.

Fitting the wick

Choose a wick suited to the diameter of the mould. Tie a double knot at one end and insert it through the tip of the mould. Secure it at the other end with a pin, making sure the knot properly blocks the opening to prevent any leaks.

Pouring and filling

Fill the mould with the liquid wax. As it cools, a dip may appear in the centre. Top up with a little hot wax if necessary. For layered moulding, the mould can be tilted slightly and steadied in a suitable holder.

Demoulding

Once the wax has cooled completely, cut the knot at the base and carefully remove the candle. If needed, place the mould in the fridge for a few minutes to make removal easier.

Practical tips and safety

Work on a protected surface and wear an apron. Make sure the mould is completely clean and dry before use. Always check the wax temperature with a thermometer.

Candle moulding must always be carried out under adult supervision. Wax vapour becomes flammable from 180 °C. Never leave a burning candle unattended, and place it on a fire-resistant surface.

An essential for your DIY cylindrical candles

The polycarbonate cylinder candle mould is a reliable tool for every maker of handmade candles. Sturdy, precise and reusable, it lets you produce elegant, perfectly even cylindrical candles, suited to decoration and to sale alike.

Supplied with a metal needle to hold the wick in place. Sealing putty or 1 plug required.